The latest in binders 

The 1880s and 1890s saw important developments in machinery to harvest the grain crop. Binders entered the Scottish harvest field.

13937892_506486346211337_7023720864970608410_oScottish agents started to exhibit them at the Highland Show from 1882 onwards.  By 1899 there were 11 Scottish machines being exhibited, though by all one maker, J. Bisset & Sons, Blairgowrie. Bisset exhibited its first binder at that show in 1887 and continued to market it as the only binder ‘entirely manufactured in Scotland’.

There were a good number of English makers of binders.  They exhibited them in increasing numbers in the mid 1880s and 1890s, though the number of machines that the exhibited fell sharply after 1900.

img_1678The majority of binders were from America and Canada.  Exhibitors and makers from these countries played an increasing role in the Highland Show from 1884.  From the mid-1890s they came to dominate the exhibition of binders.  As Henry Stephens notes in 1908 “the manufacture of combined reapers and binders is now carried on extensively by many eminent firms – Canadian and American machines competing strongly against British-made ones in our own country”.

13914125_506486432877995_3874872958305843740_oThe Highland and Agricultural Society of Scotland was keen to promote the adoption and use of binders in Scotland.  During the mid 1890s it held a series of annual exhibition of binders at work, in conjunction with the Highland Show.

At the exhibition ay Mr Morton’s farm of Muirton, Perth, in August 1896 farmers and other agriculturists could see ten machines at work.  They were from a range of makers. From Scotland, J. Bisset & Sons, Blairgowrie, exhibited its new patent open back steel-built binder, costing £44.  Two other Scottish exhibitors acted as agents for major North American companies. James Gray & Co., Stirling, was agent for Adriance, Platt & Co., New York, and exhibited its rear discharge binder, costing £35. John Wallace & Sons, Glasgow, had the Canadian Massey-Harris open end elevating canvas binder made by Massey-Harris Co. Ltd, Brantford, Ontario.

13913769_506486409544664_4297296596392674355_oThere were four English makers.  Three exhibited their own machines, also being major names on the harvest field: Harrison, McGregor & Co. Ltd, Leigh, Richard Hornsby & Sons Ltd, Grantham, Samuelson & Co. Ltd, Banbury.  Another acted as an agent: Blackstone & Co. Ltd, Stamford, renowned for its hay-making machinery, had the ‘Bonnie binder’ made by The Johnstone Harvester Co., New York. Walter A. Wood M. & R. M. Co., with a London address, but a North American company, had its open rear harvester and binder, with transport attachment.

I wonder what farmers and agriculturists thought of the spectacle of seeing these new machines as they watched them hard at work at the Highland Society’s exhibition.

The selection of photographs of binders was taken at Scotland’s Farming Yesteryear, September 2014, and at Fife Agricultural Machinery rally, June 2015.

© 2016 Heather Holmes

Share

New Holland in Scotland in 1968

From the 1960s the New Holland name has been a feature of the Scottish harvest field with its combine harvesters and balers.

13988107_506453919547913_5774358610184881176_oBy 1968 the company already had already a wide network of dealerships throughout the country, with the focus on the eastern arable area. They were located at: West Cumberland Framers Ltd, Heathhall, Dumfries, Newton St Boswells, Kilmarnock

13987541_506454222881216_6058602425469854141_oThomas Sherriff & Company Ltd, West Barns, Dunbar, and Berwick on Tweed
Carnwath Agricultural Engineering Co. Ltd, Carnwath
Inch Agricultural Engneering Co. Ltd, Bathgate
Gillies & Henderson (Forfar) Lyd, Forfar
Gillies & Henderson (Perth) Ltd, Perth
Alexander Bros. (Watten), Wick
Elgin Central Engineers Ltd, Moycroft
13925829_506454256214546_3407333780725872518_o
Hamilton of Larkhall (Tractors) Ltd, Larkhall (branch, Stirling)
Cumming & Dempster, Banchory
A. & W. Pollock Ltd, Mauchline
Landmech Limited, Dumfries
Laggan Engineering Co. Ltd, Port Ellen, Islay
Barclay, Ross & Hutchison, Ltd, depots at Aberdeen, Turriff, Montrose and Huntly
Robertson of Tain Ltd, Tain
John L. Burnett Ltd, Pittenweem
Gillies & Henderson Ltd, Edinburgh, Fife, and Haddington.

Do you remember buying your New Holland harvesting equipment from any of these dealers?

The photographs of the New Holland balers and combine were taken at the Fife Vintage Rally, June 2014 and 2015.

© 2016 Heather Holmes

Share

An International lineup 

13925865_506404346219537_308625183719904699_oAgricultural newspapers are a great source of information on Scottish agricultural implement and machine makers and dealers.  They record, at the time of publication, a wide range of information about the advertisers and their activities.  These include, business names and addresses, activities, implements and machines sold, dealerships, awards given, shows being attended (such as the Highland).  They also record information about the standing of a company and its reputation as well as the reputation of its manufactures.
The major tractor manufacturers that advertised in the Scottish agricultural press in the past, such as Fordson and Ford, David Brown and International Harvester each had their own advertising strategies and messages that they wanted to give to the Scottish farmer and agriculturist.
13919960_506404386219533_825032052996132551_oAn important message was to convey the wide availability of their tractors, and though this their popularity (as well as the easy availability of spares and servicing!).  Ford and Fordson often printed lists of all its dealers (these were especially extensive in the 1950s and 1960s). I nternational Harvester also included these.

In 1960 International Harvester had a network of 26 dealers throughout Scotland.  These were:
13914114_506404332886205_1216726298548427252_oGeorge Sellar & Son Ltd, 30 Great Northern Road, Aberdeen
Rickerby Ltd, High Street, Annan
Allan W. Reid (Ayr) Ltd, 58 Main Road, Whitletts
Grassick’s Garage Ltd, Commercial Street, Blairgowrie
Peter Small Ltd, Commerce Street, Brechin
John Huie & Co. Ltd, 60/64 Longrow, Campbeltown
James Gordon (Engineers) Ltd, New Market Street, Castle Douglas
John Rutherford & Sons Ltd, Station Garage, Cornhill on Tweed
A. Anderson, The Garage, Dingwall
Rickerby Ltd, Carnegie Street, Dumfries
John Rutherford & Sons Ltd, Rhymer’s Mill, Earlston
James Bowen & Sons Ltd, 45/49 Pitt Street, Edinburgh
13914017_506404222886216_5780635935516823734_oPeter Small, Kirriemuir Road, Forfar
Wm Reid (Forres) Ltd, Forres
Allan W. Reid (Ayr) Ltd, Bridgemill, Glenluce
George Sellar & Son Ltd, Granary Street, Huntly
J. & W. Tait, Broad Street, Kirkwall
James Jack (Hyndford) Ltd, 7 Hyndford Place, Lanark
George Sellar & Sons Ltd, Laurencekirk
A. & J. Bowen & Co. Ltd, Markinch
George Sellar & Son Ltd, Victoria Street, Maud
Grassick’s Tractors Ltd, Crieff Road, Perth
Wilson’s Agricultural Services Ltd, Harvester House, Sandbank
Arneil Tractors Ltd, 50 Kirk Street, Strathaven
Wallace & McLaren Ltd, Main Street, Thornhill
John Coghill & Co., Thurso East, Thurso.

13937813_506404289552876_5934732901000232314_oThe distribution is an interesting one: most of the dealers are in eastern Scotland (where the best agricultural land was); there are few in the north of Scotland, though Orkney and Thurso are covered; there is no representative in Glasgow, though there is one at Lanark; the dealers are located in agricultural centres and some of the county towns; a small number of the dealers had a number of branches, especially in Aberdeenshire and Forfarshire; most of the dealers were limited companies.

An advertisement can provide a wide range of information about the making and selling of agricultural implements and machines (including tractors).  Next time you see one, think about what it says about a business and its activities.

The photographs were taken at the Ayrshire Vintage Rally, July 2014 and 2015.

© 2016 Heather Holmes

Share

Tractors and their personal histories 

13914138_506401256219846_973501980697967024_oEvery tractor has its own story.  You could say that every tractor has its own personal history.  It includes details of where and how it was purchased, its cost, where it spent its working life, changes of owners as well as its servicing history.  And into the preservation era, there are details of entry into preservation, refurbishment, shows attended, road runs and other charity events attended, and prizes awarded.  And there are lots of anecdotal stories about what it was like working with the tractor, good times and bad.

13909241_506401489553156_5360146054414722575_oAround the rally field we get some idea of aspects of the personal histories of tractors from the show catalogues.  They include their details of make and model as well as the name of owner and date of production.

13909417_506401476219824_8458813396886827889_oThere is also evidence on the tractors themselves.  Dealer plates provide an important source of information on the provenance of some of the tractors.  Not all makers or dealers put a dealer plate on their tractors, but some did.  They included Fordson and Ford. And into preservation, there are still a good number of their plates to be seen.

13988090_506401396219832_8430070115684939959_oFordson and Ford had an extensive network of tractor dealers in Scotland which grew extensively in the 1930s when tractors were starting to be used in increasing numbers.  By 1951 that network was extensive, with dealerships in all parts of the country.  If you were looking to buy a Fordson in that year you would find dealers located in these places, and from these dealers:

13958257_506401369553168_8505520161623419879_oThe Harper Motor Co. Ltd, Holborn Junction, Aberdeen
A. Baird & Sons Ltd, High Street, Annan
Dalblair Motors Ltd, 44 Dalblair Road, Ayr
John Harper & Sons (Blairgowrie) Ltd, Perth Street, Blairgowrie
John McBain & Son Ltd, Chirnside, Duns
John Rutherford & Sons Ltd, Home Place, Coldstream
George McLean Ltd, Craig Street, Dundee
Macknight (Motors) Ltd, York Place, Dumfries
Alexanders of Edinburgh Ltd, 64 Fountainbridge, Edinburgh
Elgin Central Engineers Ltd, High Street, Elgin
J. Millar Ltd, Callendar Road Garage, Falkirk
A. T. Mungall Ltd, 167-9 Castle Street, Forfar
George & Jobling, 140-160 Bothwell Street, Glasgow
13987479_506401282886510_2669027128587802710_oA. W. Taylor & Son, High Street, Invergordon
Chapman of Inverness Ltd, Eastgate, inverness
Harry K. Brown (Motors) Ltd, Raith Motor Works; Nicol Street, Kirkcaldy
The Dunlop Motor Co., Ltd, 3 Nelson Street, Kilmarnock
James Martin (Kirkintilloch) Ltd, Kelvin Valley Works, Kilsyth Road, Kirkintilloch
County Garage (Lanark) Ltd, Hyndford Road, Lanark
Paisley Motor Co. Ltd, 85 Causeyside, Paisley
Frew & Company Ltd, 14 Princes Street, Perth
Millar’s Garage (Stirling) Ltd, Union Street, Stirling
Thomas Fairgrieve & Sons Ltd, Cockholm Works, Stow
13988151_506401386219833_8315374832063116424_oJames McHarrie (Stranraer) Ltd, County Garage, Stranraer
Wm Dunnett & Co., 20 Trail Street, Thurso
Shearer Brothers Ltd, Maybank Works, Turriff
Mackay & Jardine Ltd, West Cross, Wishaw

Next time you are looking carefully at the tractors down the tractor lines at a rally, have a look out for their nameplates.  There are a lot of local tractors at local shows.

The photographs of the Ford nameplates were taken at rallies throughout Scotland, 2014-16.

© 2016 Heather Holmes

Share

The art of stooking

Remember the long hours spent stooking the sheaves in the harvest field?

13920231_506143039579001_5241984369206235713_oThere was quite an art to stooking.  You had to ensure that the stooks got the best of the late summer sunshine and could dry out easily and evenly.  You had to get the sheaves standing the right way so that they would stand up against one another.  You had to watch where you placed the band-knots so that in a wet season the sheaves would not be injured.  You also had to make sure that if 13920308_506142666245705_8916180140564842773_oit was windy the stooks did not blow apart: re-stooking was always harder that stooking the first time.


But stooking was a key part of the harvest until combine harvesters were used.  Stooking let the grain and straw dry out sufficiently before it was put into the stack in the stackyard for the winter and spring months.  You wanted all your 13669433_506143302912308_2763494103028822910_osheaves to be dried properly: a heated stack injured the grain and could go on fire (if hot enough).

Henry Stephens describes the process of stooking sheaves in 1908:
https://archive.org/stream/cu31924000228332#page/n215/mode/2up

The photographs show a demonstration of stooking at the Strathnairn Working Vintage Rally and Display, 2014.

© 2016 Heather Holmes

Share

A network of combine harvesters: Claas in Scotland in the 1950s and 1960s

13923531_506436952882943_8185584833996642234_oClaas combines were already being sold in Britain in 1952 through J. Mann & Son Ltd, Saxham, Bury St Edmunds.

By 1958 these combines were being distributed by a number of agricultural implement and machine makers scattered throughout Scotland.  The Scottish distributor was R. G. Garvie & Sons, Aberdeen, the well-known and leading threshing mill maker. In addition, there were county agents in six 13913546_506437519549553_4637394954754671209_ocentral localities to ensure a geographical reach of the eastern arable area.  These were: 

A. M. Russell Ltd, Sinton Works, Gorgie Road, Edinburgh
T. Cochran & Co. Ltd, Sword Street, Glasgow
Peter Small & Son Ltd, Kirriemuir Road, Forfar
Mark Goodson Ltd, High Street, Jedburgh
Wilkes Bros, Murthly, Perthshire
William Reid (Forres) Ltd, Forres.

13909177_506437446216227_2647090502449283187_oBy 1961 that network looked very different.  It was rapidly expanded, providing greater local support for owners and for prospective customers; it also facilitated the spread of Claas machines throughout the country.  There were 14 local agents, some of which had a number of branches. These were:

13995563_506437569549548_3139723863071308793_oAnderson & Munro Ltd, High Street, Elgin
Thomas Cochran & Co. Ltd, Sword Street, Glasgow
Cumming & Dempster, Banchory
Robert Dykes, Burnside Works, Thornhill
Mark Goodson Ltd, High Street, Jedburgh
James Gordon (Engineers) Ltd, New Market Street, Castle Douglas
Grassick’s Tractors Ltd, Crieff Road, Perth (also Grassick’s Garage Ltd, Blairgowrie)
13923633_506437636216208_3631737379584974923_oWilliam Munro (Invergordon) Ltd, Royal Garage, Invergordon
A. M. Russell Ltd, Sinton Works, Gorgie Road, Edinburgh (also at Goatfield, Haddington)
Geo. Sellar & Son Ltd, 30 Great Northern Road, Aberdeen (also at Granary Street, Huntly, Victoria Road, Maud, and Station Road, Laurencekirk)
Peter Small Ltd, Kirriemuir Road, Forfar (also at Commerce Street, Brechin)
13909042_506438106216161_6298129912637131747_oJ. B. W. Smith Ltd, Bonnygate, Cupar
Wilks Bros, Murthly, Perthshire (also at Stanley).

By 1965 Class had opened a Scottish depot at 477 Gorgie Road, Edinburgh.  By 1968 it had 17 local agents throughout the country who extended as far north as Kirkwall, and as far south as Castle Douglas.  They included some new names as well as established ones. New names included Jas Mackintosh (Friockheim) 13920371_506438159549489_3256249192097590855_oLtd, Friockheim, J. & G. Sutherland Ltd, Halkirk, Caithness and J. & W. Tait Ltd, Kirkwall.

Next time you see a Claas combine around the rally fields, consider the very effective local network that was established in the 1950s and 1960s to introduce and spread the use of these combines throughout Scotland.

The photographs of the early Claas combines were taken at the Fife Vintage Machinery Rally, June 2015, and B. A. Vintage Stores, May 2016.

© 2016 Heather Holmes

Share

Buying a combine harvester in 1952 

13669452_506437652882873_4316493012359780175_oIf you were looking to buy a combine harvester in 1952 you would have had to look at machines made in other parts of Britain and Europe, with machines being imported through dealers.

You could choose between tractor drawn or self-propelled models, with the former being more common at this time.  Tractor drawn ones could be powered from the pto or engine driven. Their cuts varied from 4ft to 9ft (quite a change from those of today!).

You could choose a machine from one of eight makers and suppliers:

Allis-Chalmers Manufacturing Co., Totton, Southampton (‘Allis-Chalmers All-crop’)
Associated Manufacturers’ Co. (London) Ltd, Wembley, Middlesex
Bolinders Co. Ltd, London (‘Monktell’)
J. Mann & Son Ltd, Saxham, Bury St Edmunds (‘Claas’)
Marshall Sons & Co. Ltd’, Gainsborough, Lincs (‘Grain-Marshall’)
Massey-Harris Ltd, Manchester
Sale Tilney (Agricultural) Ltd, Wokingham
M. B. Wils & Co. Ltd, London (‘Wild harvest thresher’).

13923633_506437636216208_3631737379584974923_oAmong them was an established name in grain handling equipment and threshing machines: Marshall Sons & Co. Ltd, of Gainsborough. Its “Grain-Marshall”, model 602, was a tractor drawn, and engine driven machine with a 5ft 6in cut. Massey-Harris Ltd, Manchester, was the big name in combines.  It was selling its self-propelled no, 726. J. Mann & Son Ltd was another major player, also with the largest cut, on its tractor drawn ‘Claas’; it came with the option of being either pto or engine driven.  It incorporated a straw press, bagging platform or tank.  It was also suitable for stationary or stook threshing.

These combines changed significantly, as were the suppliers in the following decades, though Claas and Massey Harris were to come to rule the Scottish harvest field.

The photographs include later combines from Claas, as seen at Fife Vintage Agricultural Machinery Rally, June 2015 and B. A. Vintage Stores, May 2016.

© 2016 Heather Holmes

Share

125 years of harvester development

Back in 1890 the farmers of Portsoy, Banffshire, could purchase locally made reapers from the MacDonald Brothers, Portsoy.  The 13925891_506139522912686_4925404005792804547_obrothers had been making agricultural implements and machines from 1878; their early manufactures included harrows and turnip lifters.

By 1885 they had started to make back delivery reapers, a manufacture which they continued to make into the early twentieth century.  They had a number of models.  In 1890 one of them was the Princess, a one horse self-acting back delivery reaper.  Another two from 1894 were the Portsoy self-acting back delivery reaper and the Simplex self-acting back delivery reaper.  The brothers were among a number of reaper manufacturers in Scotland, others including the famous Kemp, Murray & Nicholson, Stirling, Alexander Jack & Son, Maybole, as well as Auchinachie & Simpson, Keith.

13925896_506139546246017_5972361820899229234_oBy 1889 Henry Stephens could note that “in all parts of the United Kingdom, and on almost all farms of any considerable size, the reaping machine has superseded the slower and older appliances for cutting down the corn crops.”  It was to be only a few years later that binders would start to come into force, marking another revolution in the harvest field.

If, in 1890, the users of the MacDonald Brothers’ reapers could have looked into the future to see how the harvest was cut and harvested today they would have been astounded.  For them, their reaper was an efficient harvesting implement.  It took the hard work out of cutting the crop and laid it in a neat row to be made into sheaves.  It transformed the harvest field.

13925458_506139482912690_596623420340854943_oIf we look back at the reaper we find it difficult to understand how innovate it was in its day: it was one of the most important agricultural inventions of all time.  But if you look closely at the combine you can see its ancestor, the reaper, incorporated into its design.  It’s there!

The Princess reaper from 1890 was photographed at the Strathnairn Farmers Association Working Vintage Rally & Display, September 2013.
The New Holland combine was photographed at the Fife Vintage Agricultural Machinery Club rally and farming heritage show, June 2015.

If you are interested in reading more of Henry Stephen’s account of the harvest in 1889 see: https://archive.org/stream/cu31924000275838#page/n99/mode/2up

© 2016 Heather Holmes

Share

Indoor and outdoor threshing

13661775_505448216315150_99013209670614945_oDisplays of threshing using portable threshing machines are a popular feature at a number of the rallies in Scotland.

However, the portable threshing machine was not found on all farms.  Some had machines installed at the steading.

According to Stephens’ Book of the Farm in 1908 “the portable form 13909187_505448376315134_3642916851216915530_oof threshing-machines prevails in England.  As a rule, there is no threshing machine of any kind in English farm-steadings.  The threshing is done by travelling machines owned by companies or individuals, who may have several machines at work in different parts of the country at one time.  This system is now pursued to a large extent in Scotland.”

13909330_505449786314993_1508800384828746307_o“Several leading firms of implement-makers have given much attention to the manufacture of portable threshing machines, and now the farmer has ample choice of machines of the highest efficiency.  These portable threshing machines are usually worked by steam-traction machines, which also draw them from one place to another.  In some cases portable steam-engines are employed in working the machines, but then horses have to be used in taking the machine from farm to farm.”

The photographs of the indoor Crichton threshing mill were taken at the Aberdeenshire Farming Museum, August 2014.  The photographs of threshing with the portable Garvie mill were taken at the Deeside Vintage rally, August 2014.

© 2016 Heather Holmes

Share

Getting the knife out!

13723920_503945496465422_375563457833288875_oKnives and other sharp blades played an important role on the farm, especially in harvesting crops.  Well, there were sickles, scythes, and also reaper, binder and combine harvester sections. And hand knives as well.

All required to be sharpened.  There were scythe stones as well as larger grinding machines.  There were also specialist section sharpeners that made the job easier.  A number of Scottish agricultural implement and machine makers made knife sharpeners. They included Alexander Ballach & Sons, Edinburgh, and William Dickie & Sons, Victoria Works, East Kilbride.  English makers of section sharpeners included 13913723_503945376465434_7552652076356311641_oThomas Corbett, Perseverance Iron Works, Shrewsbury.

We can under-estimate the important roles of these machines.  A sharp knife made a real difference in how easy (or not) it was to cut a crop (whether grain, green crop such as turnips, or vegetables such as onions) and 13668765_503945539798751_5350514777023836566_othe effort involved in the work.  A sharp knife just cut like a warm knife through butter!

Next time you see a knife sharpener, think about its important role, especially at harvest time!

The photographs of knife sharpeners were taken at the Borders Vintage Rally, May 2014, and at the Highland Folk Museum, Newtonmore (where there is an excellent selection).

© 2016 Heather Holmes

Share