Category: About this site

In the days when the oat crop was sown by hand, high cut ploughing facilitated the sowing of the crop. When the seed was broadcast the seed rolled to the bottom of the small sharp pointed furrows which were to be cross-harrowed. The cross harrowing broke down the tops of the furrows, evenly covering the seed to a consistent depth.

In Scotland the most noted maker of high cut ploughs was Robert Begg & Son, Implement Works, Dalry.

Robert Begg set up as a ploughmaker in Dalry, Ayrshire in 1864. By 1914 he could advertise in The Scottish farmer: “R. Begg, 50 years reputation, Dalry, Ayrshire”.

By April 1876 Robert was advertising his ploughs in the North British Agriculturist. In 1903 he described himself as an agricultural implement maker, a retail ironmonger, a smith and a smith and farrier. By 1912 he was joined by his sons, naming his business Robert Begg & Sons. Robert died in early 1927. His business was carried on his son, John. John died by 1941 and the business was transferred to Robert Wilson, Barrhead, who continued it under Begg’s name. In 1951 the business became incorporated as Robert Begg & Sons Limited, but was out of existence by October 1976 and was dissolved in the following year.

Begg’s business was associated with Sharon Street, Dalry, where it is recorded in 1886 and into at least the 1950s. From 1914 his address was the “Implement Works, Dalry.”

Robert Begg took an important step in developing his business in 1912 when he exhibited at his first Highland Show, held in that year at Cupar. This was the start of an association with the show that continued, more or less continuously, until 1960. Begg also took the important step of entering a plough into the Highland and Agricultural Society of Scotland’s exhibition of farm tractors and tractor implements in 1922. In following years, he also entered ploughs and other exhibits for the Society’s new implement award: in 1923, a double furrow self-lift tractor plough with self-lifting gear, and in 1928, Falconer’s patent mouldboard and Falconer’s coulter.
While Begg’s business changed with the times, so too did his ploughs. In 1914, Robert made a range of ploughs which included drill ploughs, double furrow ploughs, as well as bar point chill ploughs and chill ploughs. His chill ploughs were sold under the name “The Begg”.

In 1926, Begg’s ploughs included a double furrow-self lift tractor plough, with moveable points and swivel disc coulter (sold at £36 10s), a moveable point plough, with double wheels for lea and stubble ploughing (£10 10s), chill plough, plain beam, single wheel, for lea and stubble ploughing (£9). As well as drill ploughs, he also sold baulking ploughs, diamond harrows, zig zag harrows, grubbers and drill harrows.

In 1956 the “Begg” tractor ploughs included power lift ploughs, single furrow general purpose; power lift, double furrow, general purpose, single furrow, bar point digger, single furrow, spring-loaded bar point, three furrow general purpose and double furrow with adjustable land wheel.

Begg’s ploughs were also well-known on the ploughing match fields. For example, in 1925 it sold its “prize chill ploughs” and in 1928 and 1929 its “champion swing ploughs”.

Today, you can still see Begg’s ploughs at some of the ploughing matches and at vintage agricultural machinery rallies around the country. Ask anyone who Begg was and they will say a leading ploughmaker from Ayrshire.

The photographs of of the high cut ploughing were taken at the Scottish Ploughing Championships, October 2016 ad the World Ploughing Championships, Crockey Hill, September 2016. The photographs of the Begg plough were taken at the Scottish National Tractor Show, September 2015.

The business of Alexander Newlands & Sons is recorded in Linlithgow from 1880, having previously been set up in Inverurie, Aberdeenshire.

From the 1880s onwards it specialised in the making of ploughs, grubbers and harrows. Later it ventured into horse rakes. In 1900 its manufactures included a two horse swing plough; medium drill plough with marker; baulking drill plough; combined drill and potato plough; one horse drill grubber; horse or drill hoe as a drill grubber; house or drill hoe as a ridging up plough; field grubber; diamond harrows; and drill scarifier.

During its life time, the business underwent a number of significant changes. These included its incorporation as a company limited by guarantee on 6 May 1920. This allowed Alexander to reorganise his business and prepare it for the future. The memorandum and article of association of the new company provide information on the transformation of the company and also the activities it could undertake:

“The objects for which the company is established are:
(1) Primarily and without prejudice to the other objects of the company to take over (and purchase) from Messrs Newlines & Sons, agricultural implement makers and engineers, the business of implement makers and engineers, carried by them at Linlithgow and Stirling, together with the goodwill of such business and the whole or any part of the heritable and moveable property, leases, and rights, patents, and others, held and enjoyed in connection with such business and to undertake all or any of the burdens and obligations of such business.
(2) To carry on in the United Kingdom and elsewhere, all or any of the following trades or businesses, viz, implement makers, mechanical and manufacturing engineers, electrical engineers, maritime, locomotive, and other engine builders, machine and engineering tool makers, boilermakers, shipbuilders, ship repairers, shipwrights, shipowners, ship equippers, ship chandlers, barge owners, warehousemen, iron masters, colliery proprietors, miners, farmers, metalurgists, smelters, steel converters, founders of iron and brass and of metals of all kinds, smiths, plumbers, electricians, suppliers of electricity for purposes of light, heat, motive power, or otherwise, manufacturers, repairers, dealers, importers, and merchants, of motor cars, motor cycles, motor engines, motor ploughs, tractors, and implements, or any part or parts thereof, waggon builders, and repairers, timber merchants, carpenters, joiners, coach builders, and repairers, contractors for public and private works, builders, commission agents, forwarding agents, carriers, merchants, and dealers in timber, rubber, iron, steel, metal, granite, and whinstone, brickmakers and manufacturers of products from iron, steel, granite, whinstone, and other metals and minerals, and to act as traders, merchants, and dealers in relation to all or any substances or products produced in such trades or businesses, or any of them.
(3) To manufacture products from timber, leather, rubber, metals, minerals, and clays, and to dispose thereof, and to manufacture into marketable commodities, and to sell, dispose of, or use all residual or by-products resulting from the manufactures or operations in which the company may be engaged. …”

The company had a share capital of £16,000, divided into 16,000 shares of £1 each. A total of 7,000 of the shares were preferential shares; the remaining 9,000 shares were ordinary shares. The first directors were all members of the Newlands family – Alexander, George and Peter.

The governing document of the company allowed it to undertake a wide range of activities, and to diversify where this was found to be necessary. It is very unlikely that the company would have used all its powers.

The company continued in business until 9 September 1986 when it was dissolved.

One of the well known implement and machine makers in Perthshire was J. Bisset & Sons, Marlee, which was already trading in 1867. It continued in business until the mid 1960s. On 16 June 1966 the company passed a resolution to voluntarily wind up the company. It was dissolved on 20 November 1970. The company was noted for its reaping machines and binders, as well as its potato diggers.
Like a number of the other Scottish agricultural implement and machine makers, it re-organised its business and became a company limited by guarantee. It became incorporated on 19 February 1897.

If you were a farmer or an agriculturist in Deeeside from the late 1820s onwards you would have been familiar with the name of Cumming & Dempster, of Dee Street, Banchory.

The tractor and machinery dealer started like a number of the other tractor dealers across Scotland. At first it was an cycle agent and dealer and a motor engineer and garage. It later became involved in the agricultural sector. By 1950 the company described itself as “Cumming & Dempster, agricultural engineers and implement agents, Banchory”. In 1960 its main activities were as an agricultural engineer, a motor engineer and a motor engineer and agent.

If you were a farmer or agriculturist in Scotland in 1963 and you wanted to buy a tractor plough you could purchase one from a number of makers.

English makers included Bristol Tractors Ltd, David Brown Tractors (Sales) Ltd, County of Devon Engineering Co. Ltd, Fisher Humphries and Co. Ltd, International Harvester Company of Great Britain Ltd, Martin Markham Ltd, Massey-Ferguson (UK) Ltd, Ransomes Sims & Jefferies Ltd, and the Wexford Engineering Co Ltd.

The were still a small number of Scottish plough makers of major significance, who were known nationally and internationally. They included William Begg & Sons, Tarbolton, Machine, Ayrshire. The company had a range of ploughs for different tractors including Massey ferguson, Fordson Major, International, Nuffield: a hydraulic mounted plough, suitable for Ferguson tractors, single-furrow, general purpose, to which lea and stubble bodies can be fitted; a trailing, single furrow, 16 inch by 12 inch general purpose, trip cord operated lift (a geo furrow was also available); a trailing, two furrow, trip cord operated lift, with a width of 7-12 inch furrows; a hydraulic mounted, two furrow general purpose plough; and a hydraulic mounted, two furrow digger type with a width of 12 inch or 14 inch furrow.

Also, in Ayrshire Robert Begg & Son Ltd, Implement Works, Sharon Street, Dalry, had a selection including:
Tractor plough, RBS1, power lift single furrow
Tractor plough, RSB2, power lift double furrow
Bar point plough, RBS3, power lift single furrow
Bar point plough, RSB3, power lift single furrow spring loaded
Bar point plough (long frame), RBS4, power lift double furrow
Bar point plough (short frame), RBS4, power lift double furrow.

Cruikshank & Co., Ltd, Denny, Stirlingshire, had its “Denny” fitted with either dual or dandy spring loaded bar point bottoms, or Scotch bottom (point and wing).

A. Newlands & Sons Ltd, Linlithgow, had a range of ploughs. These included:
Bar point plough, 2 furrow NLD Parallel, with depth control
Bar point plough, 2 furrow, NLD parallel, without depth control
Reversible plough, 2 furrow one way
Power lift plough, 3 furrow, with depth control
Power lift plough, 3 furrow, without depth control
Power lift plough, 2 furrow wide frame, with depth control
Power lift plough, 2 furrow wide frame, without depth control
Power lift plough, 2 furrow NTP, with depth control
Power lift plough, 2 furrow, NTP, without depth control
Power lift plough, single furrow, with depth control
Power lift plough, single furrow, without depth control.

George Sellar & Son Ltd, Great Northern Road, Aberdeen also had a range of ploughs. These included its bar point mounted ploughs, “Sellar Landlord” L2/3-30, L/2, F3-30, and R2 reversible.

In 1960 farmers could still purchase a plough from a Scottish maker with a national and international reputation. They manufactured a range, with different features and methods of control.

If you were to look at the picture of plough making in 2000 you would see a very different picture with English and European makers dominating the market.

The photographs were taken at a range of rallies and vintage events throughout Scotland from 2014 onwards.

As we saw a few weeks ago, the Board of Agriculture and Internal Improvement undertook an important survey of agriculture and rural improvement in Britain from 1793 to 1817. This series was referred to as the County Agricultural Surveys, with each report having the title “General View of the Agriculture of the County of …”.

Writing the Ayrshire survey, William Aiton states the following about ploughs and plough making in Ayrshire. It provides an interesting account of developments and the spread of more modern and improved designs from neighbouring Lanarkshire and an eminent plough maker there:

“The state in which the implements of labour are found in any district, may serve as another index for judging of the taste of the farmers, the progress of agriculture, and of refinement.
As agriculture was sooner attended to, and made greater progress in England; the implements of labour were brought to considerable perfection there, when they remained very clumsy, and but ill constructed in Scotland. But as soon as improvements were attempted in the soil, corresponding improvements were begin to be made in the construction and finishing of all sorts of implements of husbandry. From what I have seen of the implements in both countries, I am disposed to believe, that those in Scotland are now as properly constructed as those in England. I have seen a much greater profusion of utensils in the hands of English improvers, both in Scotland and England, than are generally used by Scotsmen. But if the are fewer in number in Scotland, they are generally constucted there more agreeably to mechanic principles, than they frequently are on the other side of the Tweed. The wheel ploughs I have seen used in England, and many other of their implements, are not formed according to the rules of mechanism, and are attended with a waste of power. It must be acknowledged, however, that though the Scots form their implements of husbandry on better plans, they d not finish them so handsomely, as is usually done in England. Perhaps the Scotch farmers are, as yet, too sparing in their implements of labour; but I am convinced that the generality of English farmers make by far too many farm utensils. There is no doubt great room for improvements in Scotland, both as to the structure and execution of implements, and I am happy to find that improvements are making in them every year.
Ploughs
The Scotch plough, of the strongest and most clumsy construction, was in general use in the county of Ayr, till near the end od the 18th century. Swing and wheel ploughs, as then formed in England, were used by the Earls of Eglinton and Loudon, as early as 1750, and by several other noblemen and gentlemen in Ayrshire, soon after that period. But it was not till after 1790, that the Scotch plough was generally abandoned.
The head of the Scotch plough was of wood, from 2 to 3 feet long, and about 6 or 8 inches on each square. The sock was 8 inches diameter at the hinter end, and near 2 feet long. The beam from 6 to 9 feet long, and nearly 20 inches long at the middle. There wrest about 2 1/2 feet in length, and the stilts or handles about 5 or 6 feet long.
It required great power to move this monster of a plough, but when rightly constructed, it cut and set up a well shaped furrow, of large dimensions, and it was well calculated for labouring land which was stiff and bendy, or much encumbered with small stones. As it was but partially covered with iron, much power was wasted in friction. This plough was begun about 1775 to be formed more handsomely than in former times. The English swing ploughs, Rutherglen plough. and Small’s plough, began to be introduced, and others made after their construction; some of which were tolerably well, and others very indifferently executed.
But the best plough ever used in the county of Ayr, or probably in Britsin, is constructed by Mr John Wilkie, formerly in Vambuslang, now in Uddingston, near Hamilton. “This profound artist, has had the good fortune to discover everything requisite to the construction of a complete plough; and has formed an implement, the best adapted to the purpose, of any thing that has yet appeared in this county (Lanarkshire)-It turns up a furrow with a bold shoulder, like that for which the Scotch plough was valued. Its shape, like that of a well tapered wedge, turns over the soil, with the application of very moderate powers, and its broad winged share, leaves nothing unstirred.” -General view of Clydesdale, by John Naismith, Esq, p. 94.
As several hundred of Mr Wilkie’s ploughs have found their way to Ayrshire, and their superiority to all others being now admitted, by all who have used them; and as the plough-wrights in Ayrshire, have procured draughts of that plough, with casts of its mould board, and are now making it their model, I considered it my duty to apply Mr Wilkie for every possible information anent that excellent plough. I did not apply in vain; for Mr Wilkie was not only at the greatest possible pains to show and explain to me every thing regarding it; but he also drew up a particular description in writing, of his celebrated plough, which, with his permission, I insert in his own words.
“Uddingston, 15th January, 1810
Sir, In compliance with your request, I shall endeavour to give you a short account of the alterations and improvements which I have made upon the plough, within these last fifteen years. About the year 1794, the only plough in general use in this part of the country, and through the western parts of Scotland, so far as I know, was the old Scotch plough, and that constructed by Mr Small, cart and plough-wright in Midlothian. These ploughs were either procured from Mr Small himself, or from other plough makers in the neighbourhood of Edinburgh, who had been instructed by him. They had acquired such celebrity, that many plough-wrights, in different parts of Scotland, endeavoured to copy them. But as some of the artists, who attempted to do so, did not fully understand the principles on which these ploughs were constructed, many of those who were made after the figure of Mr Small’s plough, and of course obtained his name, were far from being equal to those made by himself, or according to the original design.
About that time, Mr Thomas Findlay, farmer in Cambuslang, an intimate friend of mine, procured one of the ploughs made by Mr Small, or on his model, which he found made very bad work, especially on lea land. Mr Findlay, who is a very intelligent man, and had paid attention to the principles of mechanisation, immediately constructed a plough, somewhat improved, as he thought, in the wood work: and to which he affixed Mr Small’s mould board and iron work. The plough so constructed was found to be in many respects superior to those formed on Mr Small’s plan, as will be explained in course.
Being often in company with Mr Findlay, our conversation frequently turned upon improving the form of the plough; in consequence of which I gave up with another profession, to make plough making my sole business.
From 1794 to 1798. I formed the wood-work of all the ploughs which I made, on the improved plans suggested by Mr Findlay; but I still continued to use Mr Small’s mould board. During that period, however, my ploughs did nt reach farther than my immediate neighbourhood; which is generally a strong clay soil. Though my ploughs, at that time, made better work than those formerly used; yet they did not cut out such a deep and narrow furrow as the farmers wished, and did not make near work in lea land.
As the principal defect seemed to me to lie in the twist, or curve of the mould board, I put my invention to the rack, to get it remedied. After examining ploughs, of every construction, within my reach, I was of opinion, the twist ought to be more gentle than formerly, towards the point of the sock, or share, and that it should become gradually quicker or fuller, until the furrow has been set nearly on edge, after which the resistance of the furrow is diminished, by making the twist more gentle towards the hinder part of the mould board.
On these principles, I constructed a new mould board, altogether different from any I had ever seen, or that was then in use; and made many trials and alterations on its curve or twist, till I last fixed on that which I have since used. Of its merits it would be improper for me to speak. The approbation of almost all the farmer societies on the western counties of Scotland, and of the generality of the farmers who have used my ploughs; the numerous and increasing orders I have received, and the many thousands of ploughs in these parts, that have been made by other artists, on the model of my plough, or as near as they can follow it, are the best proofs of its superior utility.
I have in the course of the last eleven years, made and sold upwards of 2,500 ploughs, and the demand is increasing every year. Mr John Guthrie, in Mount, near Kilmarnock, ordered one of my ploughs about the year 1800; the first of my making that reached the shire of Ayr: and that gentleman has received many ploughs from me since that period, for himself and his numerous friends. In the year 1802. 17 ploughs were ordered by farmers in Ayrshire, and the number increased every year until 1806, they amounted to 84 for that year: and they have continued ever since, at or near that number annually; although several hundreds have since been made on the same model by plough-wrights in Ayrshire.” …
In so far as my knowledge of that plough extends, I am satisfied that it is the best every yet invented. I have not indeed had an opportunity os using it myself, for I have not had a plough of my own since it came into general use. But from having seen and examined it with all the attention I was capable of, having seen the beautiful work which it makes; in the ease with which it is drawn; heard the concurring testimony of plowmen and plough makers, every where in its behalf; and seen almost every plough-wright in the western counties, endeavouring to make their ploughs upon the same model, I conceive that Mr Wilkie’s plough is far superior to all others.”

Lots of significant developments!

The photographs were taken at the Daviot Vintage Rally, October 2017.

If you were in Lanarkshire you would have known the name of County Garage (Lanark) Ltd at Hyndford Road, Lanark.
The company started business in 1928 and continued until 1975. By 1934 it was a Fordson dealer, retraining that agency into the 1970s. In 1955 it was also an agent for David Brown tractors.

Ploughing matches have been held in Scotland since the late eighteenth century. One of the earliest matches was held in Alloa in 1784. The Highland and Agricultural Society of Scotland gave early encouragement to matches – and still does – through the awarding of premiums to ploughmen. The first ploughing match at which the Society gave awards to was held on 7 November 1801 on the Hoddam estate.

Ploughing matches played an important role in developing the skill and technique of ploughing, encouraged a competitive spirit among ploughmen (and plough women), and also stimulated improvements in plough design. Some plough makers had their own range of competition ploughs: in the mid 1850s Gray & Co, Uddingston, boasted of the awards gained by its competition ploughs.
Henry Stephens, the celebrated agricultural writer, wrote on ploughing matches in 1889. He provides a number of insights into them:

“Ploughing matches – Although differences of opinion exist as to the usefulness of ploughing-matches, it can hardly be doubted that since their institution the skill of our ploughmen has risen considerably; not but that individual ploughmen could have been found before as dexterous as any of the present day. This improvement is not to be ascribed to the institution of ploughing-matches alone, for, no doubt, superior construction of implements, a better kept, better matched, superior race of horses, and superior judgement and taste in field labour in the farmer himself, have been potent elements in influencing the handicraft of ploughmen. …
How ploughing matches are conducted – Ploughing-matches are generally very fairly conducted in Scotland. They usually take place on lea ground, the ploughing of which is considered the best test of a ploughman’s skill, though drilling is perhaps quite as difficult of correct execution. The best part of the field is selected for the purpose, and the same extent of ground is allotted to each competitor. A peg, bearing a number, is fixed in the ground at the end of each lot, which are as many as ploughs entered in competition. Numbers on slips of paper corresponding to those on the pegs, are drawn by the competing ploughmen, who take the lots as drawn. Ample time is allowed to finish the ploughing of each lot. Although quickness of time in executing the same extent of work is not to be compared to excellency of execution, it should enter as an element in deciding the question of skill; but this it seldom does at ploughing-matches. Each competitor is obliged to “feer” his own lot, assort and guide his own horses and trim his plough-irons, without assistance.

Judges at ploughing matches – The judges are brought from a distance, so that they can have no personal interest in the exhibition, and in some cases have been requested to inspect the ground after all the ploughs have been removed, having been kept away from the scene during the time the ploughs were engaged. This appears to be an objectionable part of the arrangements, which is made on the plea that, were the judges to see the ploughs at work, some particular ones might be recognised by them as belonging to friends, and their minds might thereby be biased in their favour. Such a plea is a poor compliment to the integrity of a judge; and any farmer who accepts that responsible and honoured office, that would allow himself to be influenced by so pitiful consideration, would deserve not only to be objected to on every such occasion, but banished out of society. One consequence of the exaction of this rule is, loss of patience by the spectators, while the judges are occupying no more than the necessary time for deciding the ploughing of, it may be, a large extent of ground. The judges ought to be present all the time of the competition, when they could leisurely, calmly, and minutely ascertain the position and depth of the furrow-slices, and mature their thoughts on points which might modify first impressions. Inspection of the finished surface cannot furnish information whether the land has in all respects been correctly ploughed, which can only be obtained by comparing the soles of the furrows while the land is being ploughed. There is something to be gained in observing the manner in which the ploughman guides his horses in making the best work in the shortest time.”

Some aspects of the ploughing match have changed, while others have remained the same.

Source: Henry Stephens, The book of the Farm, division 1, Edinburgh, 1889, pp. 104-105.

The photographs were taken at the Scottish Ploughing Championships, 2014.

In Scotland ploughing matches started to be held in the late eighteenth century. By the first decade of the nineteenth century matches were held in a number of locations across Scotland. One such match was held in Easter Ross. An extensive account of it was published in the Caledonian Mercury. It provides a range of insights into how early matches were organised and some of the issues facing ploughing, the skill of ploughmen and ploughing developments.

“The Easter Ross branch of the Ross-shire Farming Society held their first ploughing match at Blackhill, the property of E. Hay McKenzie, Esq, of Cromarty, near Balnagown Castle, upon Thursday the 17th April last, when eleven ploughmen took their ground as competitors, for premiums granted by the Society; and after the work was accomplished, the Judges, who were selected from the most improved class of agriculturists, after a minute and critical inspection, unanimously adjudged the prizes to the following persons:
The first to John Ross, ploughman to Sir Charles Ross, of Balnagown, Bart, the second to Hugh Ross, ploughman to Hugh Rose, Esq of Glastullich; the third to Hector Bain, ploughman to E. H. McKenzie Esq of Cromarty; and the fourth prize to William McLeod, ploughman to Mr James Monro, taxman of Delny.
The ploughmen in general executed the work with so much skill and precision, that it was with some difficulty the judges could form their determination.
The members of the Society, in consideration of the different take being performed with so much regularity, gave a gratituity to each of the unsuccessful candidates, who were all amply refreshed with strong ale, spirits &c by the members present.
Mr Those of Glastullich was also present, and with that sentiment which so materially marks all his measures of a public nature, he gave a gratification to all the ploughmen that appeared.
Colonel John Ross, of Castle Craig, offered, previous to the competition, to give premiums to the sourth country ploughmen in the country, if they appeared, or in order to lay down a superior example to the ploughmen bred in this part, but none came forward. Colonel Ross further offered a premium for the best implements of husbandry, to those that would exceed Mr Small’s of Leith Walk, five guineas; that would equal Mr Small’s, three guineas; or that which appeared to the Society the best executed article of husbandry, three guineas. A cart made byMr John Munro at Newtarbat Shore was produced, and no other implement of husbandry having been produced, he is considered by the Society the first tradesmen in Easter Ross.
The next ploughing match of this Society is to be held in November next, of which due intimation will hereafter be given; and it is hoped there will be a more full attendance of the Gentlemen and Farmers, to countenance and forward a measure of such importance to the growing wealth of the country, and that has succeeded so perfectly in the southern parts of the kingdom.
After the ploughing match, all the members of the Society, and other gentlemen that were spectators, retired to Urquhart’s Inn, at Milntown, where they spent the evening with becoming harmony and conviviality.

Source: The Caledonian Mercury, 15 May 1806.

The photographs were taken at the Easter Ross Ploughing March, November 2017.

Sack barrows were an important piece of barn equipment for moving grain and other foodstuffs around. Barrows came in all shapes and sizes, and had a great impact on how easy or otherwise it was to move produce around. In 1875 Thomas Gibson & Son, Bainfield Iron and Wire Works, West Fountainbridge, Edinburgh, made a number of sack barrows. These included the light sack barrow, the heavy sack barrow and the wood sack barrow. Other companies such as Ben Reid & Co., Aberdeen, also made an iron sack barrow. In 1900 William Elder, Berwick Upon Tweed, made and sold “various” sack barrows.